User guide

NetXtreme II User Guide
September 2013
Broadcom Corporation
Page 204 FCoE Boot from SAN Document INGSRVT78-CDUM100-R
WINDOWS SERVER 2008 R2 AND WINDOWS SERVER 2008 SP2 FCOE BOOT INSTALLATION
Ensure that no USB flash drive is attached before starting the OS installer. The EVBD and OFC/BXFOE drivers need to be
loaded during installation. Go through the normal procedures for OS installation. When no disk devices are found, Windows
will prompt you to load additional drivers. At this point, connect a USB flash drive containing the full contents of the provided
EVBD and OFC boot driver folders. After all appropriate drivers are loaded, the setup show the target disk(s). Disconnect
the USB flash drive before selecting the disk for installation.
1. Load the EVBD driver first.