Administrator Guide

350 Fabric OS Administrator’s Guide
53-1002920-02
Zone creation and maintenance
12
Zone creation and maintenance
Fabric OS allows you to create zones to better manage devices.
NOTE
Broadcast Zone: To create a broadcast zone, use the reserved name “broadcast”. Do not give a
regular zone the name of “broadcast”. Refer to “Broadcast zones” on page 343 for additional
information about this special type of zone.
NOTE
Virtual Fabrics considerations: Zone definitions should not include logical port numbers. Zoning is
not enforced on logical ports.
Displaying existing zones
Use the following procedure to display a list of existing zones.
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the cfgShow command.
Example displaying existing zones
switch:admin> cfgshow
Defined configuration:
zone: matt 30:06:00:07:1e:a2:10:20; 3,2
alias: bawn 3,5; 4,8
alias: bolt 10:00:00:02:1f:02:00:01
alias: bond 10:00:05:1e:a9:20:00:01; 3,5
alias: brain 11,4; 22,1; 33,6
alias: jake 4,7; 8,9; 14,11
alias: jeff 30:00:00:05:1e:a1:cd:02; 40:00:00:05:1e:a1:cd:04
alias: jones 7,3; 4,5
alias: zeus 4,7; 6,8; 9,2
Effective configuration:
No Effective configuration: (No Access)
Creating a zone
ATTENTION
The zoneCreate command will add all zone member aliases that match the “aliasname_pattern” in
the zone database to the new zone.
Use the following procedure to create a zone.
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the zoneCreate command, using either of the following syntaxes:
zonecreate "zonename", "member[; member...]"
zonecreate "zonename", "aliasname_pattern*[;members]"