Administrator Guide

76 Fabric OS Administrator’s Guide
53-1002920-02
Switch names
2
-------------------------------------------------------------------------
2: fffc02 10:00:00:60:69:e0:01:46 10.3.220.1 0.0.0.0 "ras001"
3: fffc03 10:00:00:60:69:e0:01:47 10.3.220.2 0.0.0.0 "ras002"
5: fffc05 10:00:00:05:1e:34:01:bd 10.3.220.5 0.0.0.0 "ras005"
fec0:60:69bc:63:205:1eff:fe34:1bd
6: fffc06 10:00:00:05:1e:34:02:3e 10.3.220.6 0.0.0.0 >"ras006"
7: fffc07 10:00:00:05:1e:34:02:0c 10.3.220.7 0.0.0.0 "ras007"
(output truncated)
The Fabric has 26 switches
Table 4 displays the fabricShow fields.
Setting the domain ID
Use the following procedure to set the domain ID:
1. Connect to the switch and log in on an account assigned to the admin role.
2. Enter the switchDisable command to disable the switch.
3. Enter the configure command.
4. Enter y after the Fabric Parameters prompt.
Fabric parameters (yes, y, no, n): [no] y
5. Enter a unique domain ID at the Domain prompt. Use a domain ID value from 1 through 239
for normal operating mode (FCSW-compatible).
Domain: (1..239) [1] 3
6. Respond to the remaining prompts, or press Ctrl-D to accept the other settings and exit.
7. Ente r th e switchEnable command to re-enable the switch.
Switch names
Switches can be identified by IP address, domain ID, World Wide Name (WWN), or by customized
switch names that are unique and meaningful.
TABLE 4 fabricShow fields
Field Description
Switch ID The switch domain_ID and embedded port D_ID. The numbers are broken down as follows:
Example 64: fffc40
64 is the switch domain_ID
fffc40 is the hexadecimal format of the embedded port D_ID.
World Wide Name The switch WWN.
Enet IP Addr The switch Ethernet IP address for IPv4- and IPv6-configured switches. For IPv6 switches, only
the static IP address displays.
FC IP Addr The switch Fibre Channel IP address.
Name The switch symbolic or user-created name in quotes.