Messages Reference Guide

Fabric OS Message Reference 123

53-1002749-01

AG-1006

Message Access Gateway mode has been <message>.

Message Type LOG

Severity INFO

Probable Cause Indicates that the Access Gateway mode has been enabled or disabled.

Recommended

Action

Execute the ag --modeshow command to verify the current status of the Access Gateway mode.

AG-1007

Message FLOGI response not received for the N_Port <port number> connected to the fabric.

Message Type LOG

Severity WARNING

Probable Cause Indicates that the N_Port connected to the fabric switch is not online. The specified N_Port has been

disabled.

Recommended

Action

Check the connectivity between the Access Gateway N_Port and the fabric switch port.

AG-1008

Message Invalid Port Login (PLOGI) response from the fabric on the N_Port <port number>.

Message Type LOG

Severity WARNING

Probable Cause Indicates that the fabric switch management server did not accept the N_Port Login (PLOGI) request

sent by the Access Gateway.

Recommended

Action

Check the configuration of the fabric switch connected to the Access Gateway.

If the message persists, execute the supportFtp command (as needed) to set up automatic FTP

transfers; then execute the supportSave command and contact your switch service provider.