Messages Reference Guide

334 Fabric OS Message Reference

53-1002749-01

FCOE-1026

Message FDISC/FLOGI mismatch. FDISC addressed to different FCF than base FLOGI.

Message Type LOG

Severity WARNING

Probable Cause Indicates that the base port has sent a fabric login (FLOGI) but the subsequent FDISC frames that were

received on the switch do not match the original FLOGI.

Recommended

Action

It is due to a CNA or target driver issue. Contact CNA or target driver support team for assistance.

FCOE-1027

Message <message> : <mac1>:<mac2>:<mac3>:<mac4>:<mac5>:<mac6>.

Message Type LOG

Severity ERROR

Probable Cause Indicates that the Fibre Channel Forwarders (FCF) controller is not found for the DA. The end node may

be sending the FLOGI with a wrong DA MAC address.

Recommended

Action

Some parameters are not exchanged correctly between the switch and the end device. Reconfigure the

port.

FCOE-1028

Message <message> : <wwn1>:<wwn2>:<wwn3>:<wwn4>:<wwn5>:<wwn6>:<wwn7>:<wwn8>.

Message Type LOG

Severity ERROR

Probable Cause Indicates that the FCoE device with the specified World Wide Name (WWN) is not a member of the login

group.

Recommended

Action

Change the FCoE login group policy on the switch using the fcoelogingroup command so that the

device can log in.