Messages Reference Guide

526 Fabric OS Message Reference
53-1002749-01
FW-1501
5
FW-1501
Message Mail overflow cleared - <Mails discarded> alerts discarded.
Message Type LOG
Severity INFO
Probable Cause Indicates that the mail overflow condition has cleared.
Recommended
Action
No action is required.
FW-1502
Message Invalid Email address <Invalid address> is configured from pre-7.0.0 config file.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the configuration file has invalid e-mail addresses.
Recommended
Action
Reconfigure a valid e-mail address.
FW-1510
Message <Area string> threshold exceeded(High=<Threshold high>). Current value is
<Current value>: Port <Port number> disabled.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the specified port is now disabled because the link on this port had multiple link failures
that exceeded the Fabric Watch threshold on the port. Both physical and hardware problems can cause
link failures. Link failures frequently occur due to a loss of synchronization. Link failures also occur due to
hardware failures, a defective small form-factor pluggable (SFP), or a faulty cable.
Protocol errors indicates CRC sum disparity. Occasionally, these errors occur due to software glitches.
Persistent errors occur due to hardware problems.
Recommended
Action
Check for concurrent loss of synchronization errors. Check the SFP and the cable. Then, enable the port
using the portEnable command.