Messages Reference Guide

Fabric OS Message Reference 597
53-1002749-01
LFM-1004
5
LFM-1004
Message HA is out of sync for opcode <HA OPCODE>, error value <error value>.
Message Type LOG | FFDC
Severity CRITICAL
Probable Cause Indicates loss of high availability (HA) sync with remote control processor (CP).
Recommended
Action
Collect the supportsave information using the supportsave command and contact the Brocade technical
support.
LFM-1005
Message Logical port <portnum> disabled with reason <reason code>(<reason string>)
Message Type LOG
Severity WARNING
Probable Cause Indicates that the specified logical port is disabled for an internal logging purpose. This could be due to
port segmentation.
Recommended
Action
Check the reason for port disable using the switchShow command, and take appropriate corrective
action.
LFM-1006
Message The switch with domain <domain> with firmware version <version> has joined the FID
<FID> fabric and may not be compatible with XISL use.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the firmware version on the specified switch is not compatible with XISL.
Recommended
Action
Check the release notes to verify if this firmware is compatible with XISL. If it is not, remove the switch
from the fabric.