Messages Reference Guide

Fabric OS Message Reference 681
53-1002749-01
RPCD-1004
5
RPCD-1004
Message Invalid certificate file. Secure RPCd is disabled.
Message Type LOG
Severity WARNING
Probable Cause Indicates the Secure Sockets Layer (SSL) certificate file has been corrupted.
Recommended
Action
To enable remote procedure call daemon (RPCD) in secure mode, install a valid SSL certificate on the
switch.
RPCD-1005
Message Missing private key file. Secure RPCd is disabled.
Message Type LOG
Severity WARNING
Probable Cause Indicates the private key file is missing.
Recommended
Action
Run the secCertUtil command to install a valid private key file.
RPCD-1006
Message Permission denied accessing private key file. Secure RPCd is disabled.
Message Type LOG
Severity WARNING
Probable Cause Indicates the private key file configured on the switch could not be accessed because the root did not
have read-level access.
Recommended
Action
Change the file system access level for the private key file to have root read-level access.
RPCD-1007
Message Invalid private file. Secure RPCd is disabled.
Message Type LOG
Severity WARNING
Probable Cause Indicates the private key file has been corrupted.