Messages Reference Guide

744 Fabric OS Message Reference
53-1002749-01
SEC-1315
5
SEC-1315
Message <Name of command> command failed -<List of databases rejecting distribution> db(s)
configured for rejection on this switch.
Message Type LOG
Severity ERROR
Probable Cause Indicates there was an attempt to distribute databases to a switch that was configured not to accept
distributions from the fabric.
Recommended
Action
Verify the accept distribution configuration for the listed databases. Use the remoteeCfg command to
verify and correct the configuration if necessary.
SEC-1316
Message <Policy Name> policy WWN List is conflicting with domain <Domain Number>.
Message Type LOG
Severity WARNING
Probable Cause Indicates the newly added switches to the fabric, as specified by domain number, have a conflicting
policy with the local switch.
Recommended
Action
Check the conflicting policy and make the new switches and the local switch policies the same.
SEC-1317
Message Inconsistent fabric, rejecting transaction
Message Type LOG
Severity INFO
Probable Cause Indicates that either this domain is performing FDD merge or matched domains are not the same as what
CM sees.
Recommended
Action
If a policy conflict exists, resolve it, and then wait for the fabric to become stable. Retry the distribution.