Messages Reference Guide

Fabric OS Message Reference 775
53-1002749-01
SNMP-1004
5
SNMP-1004
Message Incorrect SNMP configuration.
Message Type AUDIT | FFDC | LOG
Class CFG
Severity ERROR
Probable Cause Indicates that the SNMP configuration is incorrect and therefore the SNMP service will not work correctly.
Recommended
Action
Change the SNMP configuration to the default using the snmpConfig --default command.
SNMP-1005
Message SNMP configuration attribute, <Changed attribute>, has changed from <Old Value> to
<New Value>.
Message Type AUDIT | LOG
Class CFG
Severity INFO
Probable Cause Indicates that the SNMP configuration has changed. The modified parameter and the old and new
parameter values are displayed in the message.
Recommended
Action
Execute the snmpConfig --show command to view the new SNMP configuration.
SNMP-1006
Message <SNMP Configuration group> configuration was reset to default.
Message Type AUDIT | LOG
Class CFG
Severity INFO
Probable Cause Indicates that the specified SNMP configuration group was reset to the factory default.
Recommended
Action
Execute the snmpConfig --show command for the group to view the new SNMP configuration.