Deployment Guide

Specifying the 16 Gbps SFP type
You can use the --sfpType operand as part of the thconfig command to manage the actions and
thresholds for the Current, Voltage, RXP, TXP, and Temperature areas of the 16 Gbps SFPs as
shown in the following example.
switch:admin> thconfig --apply sfp --sfptype sfptype1 -area TXP 1270 temperature 82
current 10
If you do not provide the SFP type parameters (as shown in the example below) the existing
thresholds and actions of the SFP class are changed to their default values.
switch:admin> thconfig --set sfp -area TXP --sfptype
SFP types for the 10 Gbps SFPs and 16 Gbps SFPs and QSFPs are listed in the table below.
16 Gbps and QSFP configurable SFP types TABLE 13
SFP Type Serial
Number
Area Default High Default Low
16GSWL HA Temperature (°Centigrade) 85 -5
Voltage (mVolts) 3600 3000
RXP (μWatts) 1259 32
TXP (μW) 1259 126
Current (mAmp) 12 3
Power on Hours (hours) 0 0
16GLWL HB Temperature (°C) 90 -5
Voltage (mV) 3600 3000
RXP (μW) 1995 10
TXP (μW) 1995 126
Current (mA) 70 1
QSFP HT Temperature (°C) 85 -5
Voltage (mV) 3600 2970
RXP (μW) 2180 44
TXP (μW) 0 0
Current (mA) 10 1
10GSWL KA Temperature (°C) 90 -5
Voltage (mV) 3600 3000
RXP (μW) 1999 30
Specifying the 16 Gbps SFP type
60 Fabric Watch Administrators Guide
53-1003142-01