Deployment Guide

Port class default settings (Continued)TABLE 16
Area Description Default threshold
settings
Default alarm
settings
Threshold
state
State
changes
(ST)
Monitors state changes. Unit: Changes
Time Base: minute
Low: 0
High: 50
Buffer: 0
Below: 0
Above: 0
Informative
Out_of_range
Sync loss Monitors the number of loss of
synchronization errors.
Unit: Errors
Time Base: minute
Low: 0
High: 500
Buffer: 50
Below: 0
Above: 0
Informative
Out_of_range
Protocol
errors (PE)
Monitors the number of primitive
sequence errors.
Unit: Errors
Time Base: minute
Low: 0
High: 5
Buffer: 0
Below: 0
Above: 0
Informative
Out_of_range
Received
packets
(RXP)
Monitors receive rate, by
percentage.
Unit: Percentage (%)
Time Base: minute
Low: 0
High: 100
Buffer: 0
Below: 0
Above: 0
Informative
Informative
Transmitted
packets
(TXP)
Monitors transmission rate, by
percentage.
Unit: Percentage (%)
Time Base: minute
Low: 0
High: 100
Buffer: 0
Below: 0
Above: 0
Informative
Informative
Link reset Monitors the number of link resets
sent by a given port (LR-Out) and
received on a given port (LR-In).
Unit: Errors
Time Base: minute
Low: 0
High: 500
Buffer: 50
Below: 0
Above: 0
Informative
Out_of_range
Port Monitoring
68 Fabric Watch Administrators Guide
53-1003142-01