Release Notes

Open Defects in Fabric OS v7.0.1 Beta
Fabric OS v7.0.2 Release Notes v1.0 Page 96 of 99
Defect ID: DEFECT000349012 Technical Severity: High
Summary: FICON: Active config is out of synch with FOS indicating a port is blocked after HA failover
Symptom: Active configuration indicates port is not blocked. FOS indicates port is blocked.
Feature: FICON Function: Ficud
Probability: Low
Found in Release: FOS7.0.0
Defect ID: DEFECT000349150 Technical Severity: High
Summary: BES set to faulty, due to I/O sizes greater than 512KB starting at LBA 0 for a encrypted
LUN
Symptom: BES goes faulty without clear indication of the reason
Feature: Data Security Function: Disk Encryption
Probability: Low
Found in Release: FOS7.0.0
Defect ID: DEFECT000349589 Technical Severity: High
Summary: FICON: CE DE received by host 5 seconds after B1 CCW causing channel timeout
Symptom: IFCC - CREJ Code of 00 until the implementation is completed in the patch branch, and the
CCW is enabled. Until then, it is responded to as an "Invalid CCW Command"
Feature: FICON Function: Ficud
Probability: Medium
Found in Release: FOS7.0.0
Defect ID: DEFECT000350136 Technical Severity: High
Summary: Encrypted/Compressed E-Port trunk goes down following CP failover
Symptom: Encrypted link goes down after hafailover and gets stuck at G-Port.
Workaround: Slotpoweroff /slotpoweron the blade.
Feature: 16G ASIC Driver Function: In-flight encryption/compression
Probability: Medium
Found in Release: FOS7.0.0
Defect ID: DEFECT000350457 Technical Severity: High
Summary: Access Gateway N-port stuck in G-port after code upgrade
Symptom: After upgrade fabric switch attached to AG switch with QoS enabled from 6.2.x to 6.3.x, N-
port stuck in G-Port. Disable QoS on fabric switch port, port came up fine.
Feature: Field Escalation Function: Access Gateway
Probability: Low
Found in Release: FOS6.3.1 Service Request ID: 610119