Deployment Guide

swExtTrap - The trap adds the SSN binding to the traps if it is enabled.
swStateChangeTrap - This trap is sent when the switch changes its state to online or offline.
swPortMoveTrap - This trap is sent when the virtual ports are moved from one switch to another.
swBrcdGenericTrap - This trap is sent for one of the events, such as fabric change, device change,
FAPWWN change, and FDMI events. This trap is for Brocade use.
swDeviceStatusTrap - This trap is sent whenever a device logs in or logs out.
swZoneConfigChangeTrap - This trap is sent whenever there is change in local zone database.
The Brocade trap (SW-TRAP) can be configured to send traps using the snmpConfig command.
FICON traps
linkRNIDDeviceRegistration
A device registered with the switch.
linkRNIDDeviceDeRegistration
A device de-registered with the switch.
linkLIRRListenerAdded
A listener for link failure incident is added.
linkLIRRListenerRemoved
A listener for link failure incident is removed.
linkRLIRFailureIncident
A link failure incident has occurred.
IF traps
linkDown
A linkDown trap signifies that the SNMPv2 entity, acting in an agent role has detected that the
ifOperStatus object for one of its communication links is about to transition into the down state.
linkUp
A linkUp trap signifies that the SNMPv2 entity, acting in an agent role has detected that the
ifOperStatus object for one of its communication links has transitioned out of the down state."
BD traps
bdTrap
Traps to be sent for bottleneck detection.
bdClearTrap
Traps to be sent for bottleneck clearance.
MAPS-TRAP
Consider enabling the MAPS traps if you want to use SNMP to monitor Brocade switches.
mapsTrapAM
FICON traps
Fabric OS Administrators Guide 189
53-1003130-01