Deployment Guide

6: fffc06 10:00:00:05:1e:34:02:3e 10.3.220.6 0.0.0.0 >"ras006"
7: fffc07 10:00:00:05:1e:34:02:0c 10.3.220.7 0.0.0.0 "ras007"
(output truncated)
The Fabric has 26 switches
The following table displays the fabricShow fields.
fabricShow fields TABLE 6
Field Description
Switch ID The switch domain_ID and embedded port D_ID. The numbers are broken down as shown
in the following example:
64: fffc40
64 is the switch domain_ID
fffc40 is the hexadecimal format of the embedded port D_ID.
World Wide Name The switch WWN.
Enet IP Addr The switch Ethernet IP address for IPv4- and IPv6-configured switches. For IPv6 switches,
only the static IP address displays.
FC IP Addr The switch Fibre Channel IP address.
Name The switch symbolic or user-created name in quotes.
Setting the domain ID
Use the following procedure to set the domain ID:
1. Connect to the switch and log in on an account assigned to the admin role.
2. Enter the switchDisable command to disable the switch.
3. Enter the configure command.
4. Enter y after the Fabric Parameters prompt.
Fabric parameters (yes, y, no, n): [no] y
5. Enter a unique domain ID at the Domain prompt. Use a domain ID value from 1 through 239 for
normal operating mode (FCSW-compatible).
Domain: (1..239) [1] 3
6. Respond to the remaining prompts, or press Ctrl-D to accept the other settings and exit.
7. Enter the switchEnable command to re-enable the switch.
Switch names
Switches can be identified by IP address, domain ID, World Wide Name (WWN), or by customized
switch names that are unique and meaningful.
The following considerations apply to switch naming:
Setting the domain ID
Fabric OS Administrators Guide 57
53-1003130-01