Deployment Guide

Fabric OS Command Reference 289
53-1003131-01
fabStatsShow
2
fabStatsShow
Displays fabric statistics.
SYNOPSIS fabstatsshow
DESCRIPTION Use this command to display statistics for the fabric. The following information is displayed:
• Number of times a switch domain ID has been forcibly changed
• Number of E_Port offline transitions
• Number of fabric reconfigurations
• Number of fabric segmentations resulting from any of the following causes:
- Loopback
- Incompatibility
- Overlap
- Zoning
- E_Port segment
- Licensing
- Disabled E_Port
- Platform DB
- Security incompatibility
- Security violation
- ECP error
- Duplicate WWN
- E_Port isolated
- Admin Domain header conflict
- Virtual Fabric Admin Domain conflict
- MSFR/RD H&T WWN conflict (internal only)
- Enhanced/Overlapping TI zones (ETIZ) Incompatibility
- Exchange Switch Capabilities (ESC) detected conflict
- Encryption conflict - Both ends are not configured for encryption
- Compression conflict - Both ends are not configured for encryption
- Encryp/Comp bw availability - Encryption or compression - Configured but lack of bandwidth in
the ASIC
For each recorded incident, the command provides the following additional information:
Count
The total number of times the specific event occurred on various ports on the
switch.
Port
The number of the port where the latest incident occurred. An arrow (<) next to the
port number denotes the type of event that occurred last.
Timestamp
The time when the latest incident occurred.