Deployment Guide

Fabric OS Command Reference 445

53-1003131-01

fwAlarmsFilterSet

Enables or disables alarms for Fabric Watch.

SYNOPSIS fwalarmsfilterset [mode]

DESCRIPTION Use this command to configure alarm filtering for Fabric Watch. By turning off the alarms, all

nonenvironment class alarms are suppressed. By turning on the alarms, all class alarms are generated.

NOTES This command requires a Fabric Watch license.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

OPERANDS This command has the following operand:

mode

Specify 1 to enable the alarms, 0 to disable the alarms. If no operand is specified,

the default value is 0 (alarms deactivated). This operand is optional; if omitted, this

command disables the alarms.

EXAMPLES To enable alarms in Fabric Watch:

switch:admin> fwalarmsfilterset

FW: Alarms are already disabled

switch:admin> fwalarmsfilterset 1

FW: Alarms are already enabled