Deployment Guide

ManualsBrandsDell ManualsserversDell Brocade 5100

491

492

493

494

495

496

497

498

499

500

468 Fabric OS Command Reference

53-1003131-01

haDump

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

OPERANDS None

EXAMPLES To view information about the High Availability feature status on a Brocade DCX 8510-8:

switch:admin> hadump

---------------------------------------

TIME_STAMP: Mar 30 12:57:35.109173

---------------------------------------

Local CP (Slot 7, CP1): Active, Warm Recovered

Remote CP (Slot 6, CP0): Standby, Healthy

HA enabled, Heartbeat Up, HA State synchronized

CHASSIS

Ethernet IP Address: 10.20.114.57

Ethernet Subnetmask: 255.255.240.0

CP0

Ethernet IP Address: 10.20.114.58

Ethernet Subnetmask: 255.255.240.0

Host Name: cp0

Gateway IP Address: 10.20.112.1

CP1

Ethernet IP Address: 10.20.114.59

Ethernet Subnetmask: 255.255.240.0

Host Name: cp1

Gateway IP Address: 10.20.112.1

Backplane IP address of CP0 : 10.0.0.5

Backplane IP address of CP1 : 10.0.0.6

IPv6 Autoconfiguration Enabled: Yes

Local IPv6 Addresses:

IPv6 Gateways:

---------------------------------------

TIME_STAMP: Mar 30 12:57:37.31282

---------------------------------------

== Service ==

chassis0:0(8.0)

major: 8 part: 0

lo: 0 role: 2

id: 0 dump: 3

epoch: 3 log: 0

block: 0 bits: 321

recov: 0 index: 14

upper: 14 coldnum: 3

warmnum: 14 stbynum: 4

stat: 4 prevstat: 4

sv_winsz: 64 nscm: 10

== Config ==

(Output truncated)