Deployment Guide

Fabric OS Command Reference 497
53-1003131-01
interfaceShow
2
decom_trunk_member
Indicates if decommissioning request is for a multi-link trunk.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
slot
For bladed systems only, specify the slot number of the port to be displayed,
followed by a slash (/).
port
Specify the number of the port to be displayed, relative to its slot for bladed
systems. Use switchShow for a list of valid ports. This operand is optional; if
omitted, the interface information for all ports is displayed.
When invoked without operands, this command displays the interface information for all ports on the
switch (including non-E_Ports).
EXAMPLES To display FSPF interface information:
switch:user> interfaceshow 1/19
idbP = 0x102651a0
Interface 131 data structure:
nghbP = 0x10b968f0
ifNo = 131
masterPort = 131
prgm_if_id = 0x43120021
curr_if_id = 0x43120021
prgmCnt = 1
defaultCost = 500
cost = 500
ifBw = 8G
totalBw = 24G
delay = 1
lastScn = 0
lastScnTime = Jan 01 00:00:00.000
upCount = 0
lastUpTime = Jan 01 00:00:00.000
downCount = 0
lastDownTime = Jan 01 00:00:00.000
downReason = 0
iState = UP
Neighbor 131 data structure:
state = NB_ST_FULL
lastTransition = Jun 04 05:05:02.592
nghbCap = 0x0
nghbId = 188
idbNo = 131
remPort = 243
nflags = 0xf
initCount = 0
lastInit = Jun 04 05:05:02.592
firstHlo = Jun 04 05:05:21.474