Deployment Guide

574 Fabric OS Command Reference
53-1003131-01
lsDbShow
2
lsDbShow
Displays the Fabric Shortest Path First (FSPF) link state database.
SYNOPSIS lsdbshow [domain]
DESCRIPTION Use this command to display an FSPF link state database record for switches in the fabric or for a
specified domain.
There are two types of database entries:
• The link state database entry, which is permanently allocated.
• The link state record (LSR), which is allocated when a switch is connected to the fabric.
The LSR describes the links between connected domains in a fabric. For a link to be reported in the LSR,
the neighbor for that link must be in NB_ST_FULL state.
This command displays the content of both types of database entries, if both are present, as shown
below:
Domain
Domain ID described by this LSR. A (self) keyword after the domain ID indicates
that LSR describes the local switch.
lsrP
Pointer to LSR.
earlyAccLSRs
Number of LSRs accepted, even though they were not sufficiently spaced apart.
ignoredLSRs
Number of LSRs not accepted because they were not sufficiently spaced apart.
lastIgnored
Last time an LSR was ignored.
installTime
Time this LSR was installed in the database, in seconds since boot.
lseFlags
Internal variable.
uOutIfsP
Internal variable.
uAllOutIfsP
Internal variable.
uPathCost
Internal variable.
uOldHopCount
Internal variable.
uHopsFromRoot
Internal variable.
uPathCount
The number of currently available paths to the remote domain.
mOutIfsP
Internal variable.
parent
Internal variable.