Deployment Guide

816 Fabric OS Command Reference
53-1003131-01
portCmd
2
High Priority Medium Priority Low Priority
bytes tx 0 0 19800708
bytes rx 0 0 0
PDUs tx 0 0 1434686
PDUs rx 0 0 0
out of seq PDUs rx 0 0 0
flow control count 0 0 0
last rtt N/A N/A N/A
*****************************************************************
To specify test data patterns for the source payload:
switch:admin> portcmd --tperf 16 -source -pattern random
switch:admin> portcmd --tperf 16 -source -pattern 4
switch:admin> portcmd --tperf 16 -source -pattern jitter
switch:admin> portcmd --tperf 16 -source -pattern 5
To discover the maximum MTU available on a switch:
switch:admin> portcmd --pmtu ge3.dp0 -s 192.168.0.30 -d 192.168.0.130
Path MTU detection from 192.168.0.30 to 192.168.0.130
Note: a response can take up to 32 seconds
Path MTU returned:1500
To create a WAN test session:
switch:admin> portcmd --wtool 0 create -d 76.196.3.76 -s 77.195.3.77 -r
5000000
Operation Succeeded
To start a WAN test session:
switch:admin> portcmd --wtool 0 start -t 1200
Operation Succeeded
To display the WAN test statistics for an established session:
switch:admin> portcmd --wtool 0 show -c
Id Port(L/R) Rate(Tx/Rx) UpTime RunTime
======================================================================
0 3225 / 63491 0.00 / 0.00 17s 0s
3 3226 / 61442 0.00 / 0.00 17s 0s
2 3226 / 61443 0.00 / 0.00 17s 0s
7 3225 / 63490 0.00 / 0.00 17s 0s
4 3225 / 63492 0.00 / 0.00 17s 0s
9 3226 / 61441 0.00 / 0.00 17s 0s
1 3226 / 61440 0.00 / 0.00 17s 0s
5 3226 / 61444 0.00 / 0.00 17s 0s
8 3225 / 63493 0.00 / 0.00 17s 0s
6 3225 / 63489 0.00 / 0.00 17s 0s
======================================================================
Number of Connections:10