Deployment Guide

952 Fabric OS Command Reference

53-1003131-01

portSwapEnable

Enables the PortSwap feature.

SYNOPSIS portswapenable

DESCRIPTION Use this command to enable the PortSwap feature. The portSwap command cannot be used unless the

feature is first enabled with this command.

The enabled state of the PortSwap feature is persistent across reboots and power cycles.

Enabling or disabling the PortSwap feature does not affect previously performed PortSwap operations.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

OPERANDS None

EXAMPLES To enable the PortSwap feature:

switch:admin> portswapenable

SEE ALSO portSwap, portDisable, portEnable, portShow, portSwapDisable, portSwapShow, switchShow