Deployment Guide

1. Connect to the switch and log in using an account with admin permissions.
2. Enter relayConfig --config -rla_ip relay IP address -rla_dname “relay domain name”. The quotation
marks are required.
There is no confirmation of this action.
3. Optional: Enter relayConfig --show.
This displays the configured e-mail server host address and domain name.
The following example configures the relay host address and relay domain name
for the switch, and then displays it.
switch:admin> relayconfig --config -rla_ip 10.70.212.168 -rla_dname
"mail.brocade.com"
switch:admin> relayconfig --show
Relay Host: 10.70.212.168
Relay Domain Name: mail.brocade.com
For additional information on the relay host and the relayConfig command, refer to the Fabric OS
Command Reference.
Viewing configured e-mail server information
Fabric OS allows you to view the e-mail server host address and domain name configured for MAPS.
1. Connect to the switch and log in using an account with admin permissions.
2. Optional: Enter relayConfig --show.
This displays the configured e-mail server host address and domain name.
The following example displays the configured relay host address and relay
domain name for the switch.
switch:admin> relayconfig --show
Relay Host: 10.70.212.168
Relay Domain Name: mail.brocade.com
For additional information on the relay host and the relayConfig command, refer to the Fabric OS
Command Reference.
Deleting e-mail server configuration
Fabric OS allows you to remove the e-mail server configuration used by MAPS.
To remove the e-mail server host address and domain name configured for MAPS, complete the
following steps.
1. Connect to the switch and log in using an account with admin permissions.
2. Enter relayConfig --delete.
There is no confirmation of this action.
3. Optional: Enter relayConfig --show to confirm the deletion.
Viewing configured e-mail server information
Monitoring and Alerting Policy Suite Administrator's Guide 63
53-1003147-01