Command Reference Guide

Fabric OS Command Reference 107

53-1002746-01

cfgDisable

Disables a zone configuration.

SYNOPSIS cfgdisable

DESCRIPTION Use this command to disable the current zone configuration. The fabric returns to non-zoning mode, a

mode in which all devices can see each other.

This command ends and commits the current zoning transaction buffer to both volatile and nonvolatile

memory. If a transaction is open on a different switch in the fabric when this command is run, the

transaction on the other switch is automatically aborted. A message displays on the other switches to

indicate that the transaction was aborted.

If the default zone access mode is "No Access", then this command becomes equivalent to cfgEnable

"d_efault_Cfg". Refer to defZone help for information on zone access configuration.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

When an FCS policy is enabled, this command can be issued only from the primary FCS switch.

OPERANDS None

EXAMPLES To disable the current zone configuration:

switch:admin> cfgdisable

You are about to disable zoning configuration. This

action will disable any previous zoning configuration.

Do you want to disable zoning configuration? \

(yes, y, no, n): [no] y