Command Reference Guide

Fabric OS Command Reference 201
53-1002746-01
cryptoCfg
2
In addition, this command set includes the following display commands. Output may vary depending on
your configuration. Refer to the Appendix of the Fabric OS Encryption Administrator's Guide for a more
comprehensive explanation of system states.
Use the --show -container -all -stat command for runtime status information on all CryptoTarget
containers in the encryption group. The display includes the following information:
• Encryption group name: user-define label
• Number of containers numeric value
• For each container:
- Container name: user-defined label
- Type: disk or tape
- EE node: The node WWN
- EE slot: the slot number for the encryption engine
- Target: The target port WWN
- Target PID: The target PID
- VT: The virtual target port WWN
- VT PID: The virtual target PID
- Number of hosts: numeric value
- Number of tape sessions (or rekey sessions): numeric value
- Host: The port WWN
- Host PID: The host PID
- VI: The virtual initiator port WWN
- VI PID: The virtual initiator PID
- Number of LUNs: numeric value
- LUN number: numeric ID
- LUN type: disk or tape drive, tape medium changer, tape attached medium changer, tape
offline/unknown, or unsupported/other
- LUN serial number: The LUN serial number
- Encryption mode: encrypt or cleartext
- Encryption format: (brocade) native or DF-compatible
- Tape policy type: pool-based, LUN-based
- Encrypt existing data: disabled or enabled
- Rekey: disabled or enabled
- Key life: the key life span (in days)
- Volume/Pool label: the label for the tape volume or tape pool
- Internal EE LUN state: Encrypted, Cleartext, or Disabled (Data state is cleartext but metadata
exists on the LUN, or vice versa.)
- Encryption algorithm: AES256-ECB (DF_compatible), AES256-GCM (native) or None
(cleartext)
- Key ID state: Read, Write, or Key ID not applicable
- Key ID: The Key ID (if available)
- New LUN: Yes or No
- Replication LUN type: Primary or Mirror
- Tape session number: numeric value
- Number of uncompressed blocks: numeric value