Command Reference Guide

202 Fabric OS Command Reference
53-1002746-01
cryptoCfg
2
Use the --show -container -all -cfg command for configuration information on all CryptoTarget
containers in the encryption group, or specify a crypto_target_container_name for information on a
specified CTC. The display includes the following information:
• Encryption group name: user-defined label
• Number of containers: numeric value
• For each container
- Container name: a user-defined label
- Type: tape or disk
- EE node: the node WWN
- EE slot: numeric value
- Target: target port WWN, node WWN
- VT: virtual target port WWN, node WWN
- Number of hosts: numeric value
- Configuration status: committed or defined
- For each host: the host port WWN and the node WWN
- For each VI: the virtual initiator port WWN and the node WWN
- Number of LUNs: numeric value
If a rekey session is in progress while the command is run, the following additional information is
displayed:
• LUN number: numeric ID
• LUN type: disk, tape drive, tape medium changer, tape attached medium changer, offline/unknown,
or unsupported/other
• LUN serial number (disk only): alpha-numeric ID
• Encryption mode: encrypt or cleartext
• Encryption format: native or DF compatible
• Encrypt existing data: enabled or disabled
• Rekey: enabled or disabled
• LUN state: refer to the appendix in the Fabric OS Encryption Administrator's Guide
• Encryption algorithm: AES256 -XTS (disk), AES256-CCM (tape), or none
• Key ID state: Rekey
• Key ID: numeric identifier
• Key creation time: date and time of key creation
• Key life (in days); number of days until expiration
• Rekey status: numeric value
• Key expiration time
• Rekey session number: numeric value
• Percentage complete
• Rekey state: Read or write Phase
• Rekey role: primary, alternate
• Block size: numeric value
• Number of blocks: numeric value
• Current logical block address (LBA) being processed
Use the --show -tapepool command to display tape pool configuration parameters for all Tape pools or
for a specific tape pool. For each tape pool, the display includes the following information:
• tape pool Label: user-define label
• Key Life: Life span in days