Command Reference Guide

292 Fabric OS Command Reference

53-1002746-01

fcipHelp

Displays FCIP command information.

SYNOPSIS fciphelp

DESCRIPTION Use this command to display a listing of Fibre Channel over IP (FCIP) commands with short descriptions

for each command. FCIP commands require an FCIP license.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

OPERANDS None

EXAMPLES To display FCIP command help information:

switch:admin> fciphelp

bladecfggemode Configure 1GigE/10GigE port configuration

for blade

fciphelp Print FCIP help info

licenseslotcfg Configure licenses on a slot basis

portcfg Create/Delete a new ip interface/route/arp

entry on the GigE port

portcfggemediatype Configure media type for GigE port

portcmd Execute commands (ping etc) on the GigE port

portshow Show configured ip interfaces/routes/arp

entries or fcip tunnels on the GigE Port