Command Reference Guide

Fabric OS Command Reference 353

53-1002746-01

fdmiCacheShow

Displays abbreviated remote FDMI device information, according to remote domain ID.

SYNOPSIS fdmicacheshow

DESCRIPTION Use this command to display FDMI cache information for remote domains only.

The state of each remote domain, identified by its domain ID, is shown to be unknown, known,

unsupported, or error.

The revision of the switch also displays, followed by the world wide name of the switch.

For HBAs, only the HBA identifiers and registered port lists are displayed. No detailed HBA attributes are

displayed. For registered ports, only port identifier and corresponding HBA are shown; no detailed port

attributes are displayed.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

OPERANDS None

EXAMPLES To display the FDMI cache:

switch:admin> fdmicacheshow

Switch entry for domain 3

state: known

version: v310

wwn: 10:00:00:60:69:90:03:c7

HBAs:

10:00:00:00:c9:25:9b:96

Ports: 1

10:00:00:00:c9:25:9b:96

Total count of devices on the switch is 1