Deployment Guide

6. Review your changes. A blue background in a cell indicates that its value has been modified.
7. After you have finished making changes, do any of the following:
• Click Activate to save the changes and make the configuration active immediately, as described
in Activating an Allow / Prohibit Matrix configuration on page 242.
• Click Save to save the changes but not make the configuration active.
• Click Save As to save the configuration to a new configuration file. When you click Save As, a
dialog box displays in which you should enter a file name and description for the configuration
file.
• Click Refresh to refresh the information from the switch.
• Click Cancel to cancel all changes without saving.
FIGURE 47 Allow / Prohibit Matrix Configuration dialog box
Activating an Allow / Prohibit Matrix configuration
When you activate a saved Allow / Prohibit Matrix configuration on the switch, the preceding
configuration (currently activated) is overwritten.
To activate an Allow / Prohibit Matrix configuration, perform the following steps.
1. Open the Allow / Prohibit Matrix configuration list.
2. Select the saved configuration from the list.
3. Click Activate .
The Activate Allow / Prohibit Matrix Configuration confirmation dialog box displays. The
message reminds you that the current configuration will be overwritten upon activation.
Activating an Allow / Prohibit Matrix configuration
242 Web Tools Administrator's Guide
53-1003169-01