Deployment Guide

Changing the Admin Domain context
The Admin Domain field displays the currently selected Admin Domain and allows you to change to a
different one. The ability to change Admin Domain context requires that the EGM license is enabled on
the switch. Otherwise, an error message displays.
If you are logged in to Web Tools without the EGM license, you must log in again using a specific Admin
Domain.
After you log in, all Admin Domains assigned to you are available in the menu. For most administrative
tasks, you must be in either AD0 or the physical fabric.
When changing the Admin Domain context, the option for selecting AD from the list is not available if
the EGM license is not present.
To change the Admin Domain context, perform the following steps.
1. Select a domain from the Admin Domain menu.
2. Click OK in the confirmation window.
Switch Explorer refreshes to display the new Admin Domain context. You can monitor the progress
using the progress bar.
The system displays a list of all open windows. You can choose to change the Admin Domain, which
closes all the open windows, or cancel the action and return to Switch Explorer.
NOTE
The Telnet window and the Fabric Details are not AD-filtered and do not need to be closed.
Switch View buttons
The Switch View buttons let you access the following switch information:
• Status --Click the button to view the status of the switch.
• Temp --Click the button to view temperature monitors.
• Power --Click the button to view power supply information.
• Fan --Click the button to view the status of the switch fans.
NOTE
For all status displays based on errors per time interval, any errors cause the status to show faulty until
the entire sample interval has passed.
Switch View
You can click the small right arrow towards the left of the Switch Event tab to display the Switch View .
The Switch View displays a graphical representation of the switch, including a real-time view of switch
and port status. Refer to Figure 4 on page 39.
NOTE
Blades are graphically represented in the Web Tools GUI. They are vertical in the DCX, and horizontal
in the DCX-4S.
Changing the Admin Domain context
Web Tools Administrator's Guide 41
53-1003169-01