Developers Guide

404 Fabric OS Message Reference

53-1003140-01

FCR-1084

Message The resume retry count is exhausted for the domain <Domain>.

Message Type LOG

Severity WARNING

Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric did not accept the resume

message which prevented the protocol from completing. Any data traffic disruption observed during the

firmware download may have been the result of this issue.

Recommended

Action

No action is required.

FCR-1085

Message HA sync lost as remote CP does not support FCR based matrix.

Message Type LOG

Severity ERROR

Probable Cause Indicates that the remote control processor (CP) has older firmware, which does not support the

FCR-based matrix while the local CP has the feature enabled. This is causing the loss of the high

availability (HA) synchronization.

Recommended

Action

Disable the FCR-based matrix or upgrade the remote CP.

FCR-1086

Message HA sync lost as remote CP does not support 8 Gbps-capable FC based EX_Ports.

Message Type LOG

Severity ERROR

Probable Cause Indicates that the remote control processor (CP) has older firmware, which does not support 8

Gbps-capable FC based EX_Port. This is causing the loss of the high availability (HA) synchronization.

Recommended

Action

Disable 8 Gbps-capable FC based EX_Ports or upgrade the remote CP.