Messages Reference Guide

Fabric OS Message Reference 179

53-1002749-01

BL-1050

Message Incompatible Blade Processor FPGA version with FOS7.0 firmware in slot=<slot

number> on FX8-24. Contact support for upgrade instructions.

Message Type LOG

Severity WARNING

Probable Cause Indicates that the blade processor field-programmable gate array (FPGA) version with Fabric OS v7.0.0

is incompatible on the FX8-24 blade.

Recommended

Action

Contact your switch service provider for upgrade instructions.

BL-1051

Message Incompatible Blade Processor FPGA version with FOS7.0 firmware on 7800. Contact

support for upgrade instructions.

Message Type LOG

Severity WARNING

Probable Cause Indicates that the blade processor field-programmable gate array (FPGA) version with Fabric OS v7.0.0

is incompatible on the Brocade 7800 switch.

Recommended

Action

Contact your switch service provider for upgrade instructions.

BL-1052

Message Link Reset threshold exceeded in the internal port (slot <slot number>, port <port

number>). No core blade has been faulted because it has only one active core

blade.

Message Type LOG

Severity WARNING

Probable Cause Indicates that the internal port in the core blade exceeded the link reset threshold level. Faulting the peer

edge blade because there is only one active core blade.

Recommended

Action

Replace the core blade.