Messages Reference Guide

180 Fabric OS Message Reference
53-1002749-01
BLS-1000
5
BLS Messages
BLS-1000
Message <command name> of GE <port number> failed. Please retry the command. Data:
inst=<ASIC instance> st=<ASIC initializing state> rsn=<reason code> fn=<message
function> oid=<ASIC ID>.
Message Type LOG | FFDC
Severity ERROR
Probable Cause Indicates that the hardware is not responding to a command request, possibly because it is busy.
Recommended
Action
Retry the command.
BLS-1001
Message FIPS <FIPS Test Name> failed; algo=<algorithm code> type=<algorithm type>
slot=<Slot Number>.
Message Type LOG | FFDC
Severity CRITICAL
Probable Cause Indicates that a Federal Information Protection Standard (FIPS) failure has occurred and requires faulting
the blade or switch.
Recommended
Action
Retry the command.
BLS-1002
Message An IPsec/IKE policy was added.
Message Type AUDIT | LOG
Class CFG
Severity INFO
Probable Cause Indicates that an Internet Protocol Security (IPsec) or Internet Key Exchange (IKE) policy was added and
the configuration file was updated.
Recommended
Action
No action is required.