Messages Reference Guide

Fabric OS Message Reference 297
53-1002749-01
ESS-1001
5
ESS Messages
ESS-1001
Message A few switches in the fabric do not support the Coordinated HotCode protocol.
Message Type LOG
Severity WARNING
Probable Cause Indicates one or more switches in the fabric do not support the Coordinated HotCode protocol.
Continuing with the firmware download may cause data traffic disruption.
Recommended
Action
Discontinue the firmware download, identify the down-level switch or switches that do not support the
Coordinated HotCode protocol, and upgrade the down-level switches. Then, restart the firmware
download on this switch. Note that upgrading a down-level Brocade switch in a mixed interop fabric may
still cause data traffic disruption.
ESS-1002
Message The pause message is rejected by the domain <domain id>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has rejected the pause
message which prevented the protocol from completing. Any data traffic disruption observed during the
firmware download may have been due to the rejected pause message.
Recommended
Action
No action is required.
ESS-1003
Message The pause retry count is exhausted for the domain <domain id>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric did not accept the pause
message which prevented the protocol from completing. Any data traffic disruption observed during the
firmware download may have been due to this issue.
Recommended
Action
No action is required.