Messages Reference Guide

376 Fabric OS Message Reference
53-1002749-01
FICN-1009
5
FICN-1009
Message DevIng:CmdReject Sense Data rcvd:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> LastCmds=0x<the Last 4 commands
issued to the device> Sense Data:Bytes0-0xB=0x<bytes 0-3 of sense data from the
device><bytes 4-7 of sense data from the device><bytes 8-0x0b of sense data from
the device>.
Message Type LOG
Severity INFO
Probable Cause Indicates a Unit Check status was received from a device and a sense command was issued to read the
sense data.
Recommended
Action
If there was a job failure associated with this event, contact your vendor's customer support for
assistance.
FICN-1010
Message DevDiskEgr:Device level exception flag found for Path=0x<VEPortNumber HostDomain
HostPort DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>: Oxid=0x<The OXID that
was reported in the Device Level Exception Frame>.
Message Type LOG
Severity INFO
Probable Cause Indicates a Device Level Exception frame was received from the FICON channel.
Recommended
Action
If there was a job or I/O failure associated with this event, contact your vendor's customer support for
assistance.
FICN-1011
Message DevDiskIng:XRC Incorrect RRS SeqNum Rcvd Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> Expected=0x<The RRS Sequence
number that was expected from the device> Received=0x<The RRS Sequence number that
was actually received from the device> Oxid=0x<The data frame's OXID>.
Message Type LOG
Severity ERROR
Probable Cause Indicates the Control unit or device presented a Read Record Set Sequence number different from the
SDM's expected sequence number.
Recommended
Action
If there was an XRC volume or session suspended associated with this event, contact your vendor's
customer support for assistance.