Messages Reference Guide

396 Fabric OS Message Reference
53-1002749-01
FICN-1069
5
FICN-1069
Message Emulation Configuration Error on TunnelId <Tunnel ID>:.
Message Type LOG
Severity ERROR
Probable Cause Indicates an error has been noted in the FICON configuration. Refer to the string for the nature of the
configuration issue.
Recommended
Action
If resolution of the configuration issue cannot be completed, contact your vendor's customer support for
assistance.
FICN-1070
Message DevTapeIngr:Exceptional Status rcvd on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<current emulation
state> status=0x<the exceptional status value>.
Message Type LOG
Severity INFO
Probable Cause Indicates the normal end of tape status (0x0D or 0x05) is received from the device or error status
(including Unit Check 0x02) is received from an active emulation device.
Recommended
Action
The end of tape is a normal event during pipelining and not the unit check. If there are associated I/O
error messages with this event, contact your vendor's customer support for assistance.
FICN-1071
Message HostTapeIngr:Tape Loaded on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.
Message Type LOG
Severity INFO
Probable Cause Indicates the tape I/Os are processed from a locally connected Logical Partition (LPAR), which indicates
that a tape is loaded on a device.
Recommended
Action
No action is required.