Messages Reference Guide

Fabric OS Message Reference 415
53-1002749-01
FICN-2006
5
FICN-2006
Message FICON VEPort <VE port number> Feature Change failed Xrc <1 or 0 - XRC Emulation
Enabled or Disabled> TapeWrt <1 or 0 - Tape Write Emulation Enabled or Disabled>
TapeRd <1 or 0 - FICON Tape Read Emulation Enabled or Disabled> TinTir <1 or 0 -
FICON TIN/TIR Emulation Enabled or Disabled> DvcAck <1 or 0 - FICON Device Level
Ack Emulation Enabled or Disabled> RdBlkId <1 or 0 - FICON Write Emulation Read
Block ID Emulation Enabled or Disabled>.
Message Type LOG
Severity WARNING
Probable Cause Indicates the FCIP Tunnel ID associated with the FICON tunnel must be down or disabled for a feature
change to become effective.
Recommended
Action
Disable the applicable FCIP tunnel to make the feature change effective.
FICN-2064
Message Ingress Abort:Oxid=0x<the OXID of the aborted exchange>:Unknown Path on
VEPort=<VEPortNumber> from SID=0x<Source Domain><Source Port> to
DID=0x<Destination Domain><Destination Port>.
Message Type LOG
Severity INFO
Probable Cause Indicates an abort operation has been received from a local FC interface for an exchange.
Recommended
Action
If there were associated I/O errors at the same time as this event, contact your vendor's customer
support for assistance.
FICN-2065
Message Egress Abort:Oxid=0x<the OXID of the aborted exchange>:Unknown Path on
VEPort=<VEPortNumber> from SID=0x<Source Domain ><Source Port> to
DID=0x<Destination Domain><Destination Port>.
Message Type LOG
Severity INFO
Probable Cause Indicates an abort operation has been received from a peer FC interface for an exchange.
Recommended
Action
If there were associated I/O errors at the same time as this event, contact your vendor's customer
support for assistance.