Messages Reference Guide

Fabric OS Message Reference 643
53-1002749-01
PDM-1004
5
PDM-1004
Message PDM memory shortage.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the Parity Data Manager (PDM) process ran out of memory.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
PDM-1005
Message FSS register failed.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the Parity Data Manager (PDM) failed to register with the Fabric OS synchronization
service (FSS).
Recommended
Action
Execute the firmwareDownload command to reinstall the firmware.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
PDM-1006
Message Too many files in sync.conf.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the sync.conf configuration file contains too many entries.
Recommended
Action
Execute the firmwareDownload command to reinstall the firmware.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.