Messages Reference Guide

Fabric OS Message Reference 661
53-1002749-01
PS-1003
5
PS-1003
Message Failed to set end-to-end monitoring mask on ISL ports.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the restoring configuration has attempted to set the end-to-end monitoring mask on at least
one inter-switch link (ISL) port.
Recommended
Action
No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is
enabled. ISL monitoring can only be disabled through the Fabric Access API.
PS-1004
Message Failed to add end-to-end monitors on port <port> which is an ISL port.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the restoring configuration has attempted to add end-to-end monitors on at least one
inter-switch link (ISL) port.
Recommended
Action
No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is
enabled. ISL monitoring can only be disabled through the Fabric Access API.
PS-1005
Message ISL monitor on port <port> stopped counting because no hardware resources are
available.
Message Type LOG
Severity WARNING
Probable Cause Indicates that inter-switch link (ISL) and end-to-end monitors have used up all the hardware resources.
Recommended
Action
To resume counting, delete some end-to-end monitors sharing the same hardware resource pool by
using the perfDelEEMonitor command.