Messages Reference Guide

Fabric OS Message Reference 765
53-1002749-01
SEC-3038
5
SEC-3038
Message Event: ipfilter, Status: failed, Info: Failed to activate <IP Filter Policy>
ipfilter policy.
Message Type AUDIT | LOG
Class SECURITY
Severity INFO
Probable Cause Indicates the specified IP filter policy failed to activate.
Recommended
Action
Verify the security event was planned. If the event was planned, no action is required. If the security
event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3039
Message Event:Security Violation , Status: failed, Info: Unauthorized host with IP address
<IP address of the violating host> tries to establish connection using <Protocol
Connection Type>.
Message Type AUDIT | LOG
Class SECURITY
Severity INFO
Probable Cause Indicates a security violation was reported. The IP address of the unauthorized host is displayed in the
message.
Recommended
Action
Check for unauthorized access to the switch through the specified protocol connection.
SEC-3044
Message The FIPS mode has been changed to <Fips Mode>.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates there was a change in the Federal Information Processing Standards (FIPS) mode.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.