Messages Reference Guide

Fabric OS Message Reference 807
53-1002749-01
SS-1006
5
SS-1006
Message supportsave not collected for slot <Slot Number>. Reason: blade was not available
to accept a supportsave request.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the supportsave request was not sent to the blade in the specified slot.
Recommended
Action
Restart the switch using the reboot command and then execute the supportSave command.
SS-1007
Message supportsave failed for the slot <Slot Number>. Reason: No response from the blade
in the specified slot for the given supportsave request.
Message Type LOG
Severity WARNING
Probable Cause Indicates that there was no response from the blade in the specified slot for the given supportsave
request.
Recommended
Action
Restart the switch using the reboot command and then execute the supportSave command.
SS-1008
Message supportsave failed for the slot <Slot Number>. Reason: BP supportsave timeout.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the specified slot has taken more time than expected to collect the supportsave logs.
Recommended
Action
Execute the supportSave command again.