Messages Reference Guide

Fabric OS Message Reference 811
53-1002749-01
SSMD-1004
5
SSMD-1004
Message Failed to unlock semaphore mutex: (<function name>).
Message Type LOG
Severity ERROR
Probable Cause Indicates that the specified function failed to unlock the mutex (semaphore).
Recommended
Action
Restart or power cycle the switch.
SSMD-1005
Message SSM start up failed.
Message Type LOG
Severity ERROR
Probable Cause Indicates that Data Center Ethernet (DCE) SSM encountered an unexpected severe error during basic
startup and initialization.
Recommended
Action
Restart or power cycle the switch.
If the problem persists, download a new firmware using the firmwareDownload command.
SSMD-1006
Message Error while configuring ACL <ACL name> on interface <Interface name>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that an error occurred while programming a Ternary Content Addressable Memory (TCAM)
entry on the specified interface.
Recommended
Action
Try again after some time. If the problem persists, execute the supportSave command and then restart
or power cycle the switch.