Manualshelf

Messages Reference Guide

ManualsBrandsDell ManualsserversDell Brocade 5100
871872873874875876877878879880
Fabric OS Message Reference 855
53-1002749-01
SYSM-1004
5
SYSM-1004
Message Failed to retrieve current chassis configuration option, ret=<Unknown>.
Message Type LOG
Severity ERROR
Probable Cause Indicates there was a failure to read configuration data from the World Wide Name (WWN) card.
Recommended
Action
Verify that the WWN card is present and operational and the affected control processor (CP) is properly
seated in its slot.
SYSM-1005
Message CP blade in slot <Slot number> failed to retrieve current chassis type.
Message Type FFDC | LOG
Severity CRITICAL
Probable Cause Indicates there was a failure to read the chassis type from the system.
Recommended
Action
Verify the control processor (CP) blade is operational and is properly seated in its slot.
SYSM-1006
Message CP blade in slot <Slot number> is incompatible with the chassis type.
Message Type FFDC | LOG
Severity CRITICAL
Probable Cause Indicates this chassis type is not compatible with the control processor (CP) blade.
Recommended
Action
Use the CP blade on a compatible chassis.