Messages Reference Guide

Fabric OS Message Reference 881
53-1002749-01
XTUN-1006
5
XTUN-1006
Message FCIP FC frame drop due to transmit timeout on slot=<FX8-24 Slot number (or 0 if
7800)> DP=<FX8-24 DP number (or 0 if 7800)> BLS=<Blaster Image Number (0 or 1)>
DR=<FC Descriptor Ring Number> Frames Dropped=<Number of FC frames that were
dropped>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that a Fibre Channel (FC) Send frame timeout occurred and the frames were dropped from the
SW queue.
Recommended
Action
This error indicates that there is a slow draining device or a hung Blaster TX Descriptor Ring.
XTUN-1007
Message FCIP FC frame drop due to truncated receive on slot=<FX8-24 Slot number (or 0 if
7800)> DP=<FX8-24 DP number (or 0 if 7800)> BLS=<Blaster Image Number (0 or 1)>
DR=<FC Descriptor Ring Number> Frames Dropped=<Number of FC frames that were
dropped>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that a Fibre Channel (FC) Received frame event was posted, but the frame was dropped due to
an invalid receive length. This error occurs only on faulty hardware.
Recommended
Action
Contact your vendor's customer support for assistance.
XTUN-1996
Message FTRACE buffer <FTRACE Trace Buffer Number> on slot <FX8-24 Slot Number> DP <FX8-24
DP Number> has been cleared.
Message Type LOG
Severity INFO
Probable Cause Indicates that a CLI command or supportSave operation freed the trace buffer back into the FTRACE
free pool.
Recommended
Action
No action is required.