MIB Reference Guide

Fabric OS MIB Reference 33
53-1002750-01
System group
2
TABLE 8
Object and OID Access Description
sysDescr
1.3.6.1.2.1.1.1
Read only A textual description of the entity. This value should include the full name
and version identification of the hardware type, software operating system,
and networking software.
This must contain only printable ASCII characters.
Set this value using the snmpconfig command. The default value is either
Fibre Channel Switch or Access Gateway.
sysObjectID
1.3.6.1.2.1.1.2
Read only The vendor’s authoritative identification of the network management
subsystem contained in the entity. This value is allocated within the SMI
enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous
means for determining what kind of device is being managed.
For example, if a vendor “NetYarn, Inc.” was assigned the subtree
1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its
“Knit Router.”
The default value is either:
• Fibre Channel Switches:
iso.org.dod.internet.private.enterprises.bcsi.commDev.fibrechannel.fcS
witch.sw
• Brocade Access Gateway:
iso.org.dod.internet.private.enterprises.bcsi.commDev.fibrechannel.fcS
witch.sw
sysUpTime
1.3.6.1.2.1.1.3
Read only The time (in hundredths of a second) since the network management portion
of the system was last re-initialized.
Set this value using the switchuptime command.
sysContact
1.3.6.1.2.1.1.4
Read-write The textual identification of the contact person for this managed node,
together with information on how to contact this person. The minimum length
of the string must be of four characters.
The default is Field Support.
Set this value using the snmpconfig command.
sysName
1.3.6.1.2.1.1.5
Read-write An administratively assigned name for this managed node. By convention,
this is the node’s fully qualified domain name. The default is the preassigned
name of the logical switch.
Set this value using the snmpconfig command.