Administrator Guide
16 EZSwitchSetup Administrator’s Guide
53-1002744-01
Installing and running the EZSwitchSetup wizard
2
FIGURE 11 Continue Configuration window
3. Click Continue.
Depending on the option selected, one of the following outcomes occurs:
• If you selected Continue setting up your target switch with EZManager, a dialog box
displays warning you that EZSwitchSetup supports only single switch fabrics. Click OK to
start the EZSwitchSetup Manager.
A browser window opens, and the Switch Configuration Welcome window is displayed
(Figure 12). This may take a few minutes.
If the configuration wizard does not launch, you must launch it manually by specifying the
URL in a browser:
http://switch-ip-address
If the switch discovery fails, see “Switch discovery failure” on page 17 for details on how to
recover your switch.
• If you selected Discover another switch on the same subnet for IP assignment only, the
Discover Switch window displays (Figure 7 on page 12). Go to “Discovering the switch” on
page 12 and provide the WWN for the next switch.
• If you selected Exit EZSwitchSetup, the wizard closes.