Administrator Guide
3. Click Continue.
Depending on the option selected, one of the following outcomes occurs:
• If you selected Continue setting up your target switch with EZManager, a dialog box displays
warning you that EZSwitchSetup supports only single-switch fabrics. Click OK to start the
EZSwitchSetup Switch Manager.
A browser window opens, and the Switch Configuration Welcome window is displayed (
FIGURE 12
on page 23). This may take a few minutes.
If the EZSwitchSetup switch configuration wizard does not launch, you must launch it manually by
specifying the URL in a browser:
http://switch-ip-address
If the switch discovery fails, refer to
Switch discovery failure
on page 22 for details on how to
recover your switch.
• If you selected Discover another switch on the same subnet for IP assignment only, the
Discover Switch window displays (
FIGURE 7
on page 17). Go to
Discovering the switch
on
page 17 and provide the WWN for the next switch.
• If you selected Exit EZSwitchSetup, the EZSwitchSetup switch configuration wizard closes.
Setting Up Your Switch
EZSwitchSetup Administrator’s Guide 21
53-1002940-01