Command Reference Guide

ManualsBrandsDell ManualsserversDell Brocade 6505

1021

Fabric OS Command Reference 999

53-1002746-01

supportShowCfgShow

Displays the groups of commands enabled for display by the supportShow command.

SYNOPSIS supportshowcfgshow

DESCRIPTION Use this command to display the groups of commands enabled for display by the supportShow

command. Use the supportShowCfgEnable and the supportShowCfgDisable commands to modify

which groups are displayed.

The FCIP commands are supported only on the Brocade 7800/FX8-24 platforms and cannot be

configured to collect or display data on unsupported platforms.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

OPERANDS None

EXAMPLES To display command groups configured for data collection on the Brocade 6510:

switch:admin> supportshowcfgshow

os enabled

exception enabled

port enabled

fabric enabled

services enabled

security enabled

network enabled

portlog enabled

system enabled

extend disabled

filter disabled

perfmon disabled

ficon disabled

iswitch disabled

asic_db enabled

fcip disabled (not applicable to this platform)

ag disabled

To display command groups configured for data collection on the Brocade 7800