Command Reference Guide

1056 Fabric OS Command Reference

53-1002746-01

thMonitor

Enables monitoring of small form-factor pluggables (SFPs).

SYNOPSIS thmonitor --enable brcdsfp

thmonitor --disable brcdsfp

thmonitor --show

DESCRIPTION Use this command to enable Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G

QSFPs. Fabric Watch does not monitor 10G and 16G SFPs or 16G QSFPs unless monitoring is explicitly

enabled with this command.

NOTES This command requires a Fabric Watch license.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

OPERANDS This command has the following operands:

--enable brcdsfp

Enables Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G

QSFPs. The feature is by default disabled.

--disable brcdsfp

Disables Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G

QSFPs.

--show

Displays the current configuration.

--help

Displays the command usage.

EXAMPLES To enable Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G QSFPs.

switch:admin> thmonitor --enable brcdsfp

Brcd SFP Threshold Monitoring is enabled

To display the configuration:

switch:admin> thmonitor --show

Brcd SFP Threshold Monitoring is enabled

To disable Fabric Watch threshold monitoring for 10G and 16G FPs and for 16G QSFPs.

switch:admin> thmonitor --disable brcdsfp

Brcd SFP Threshold Monitoring is disabled