Administrator Guide

186 Web Tools Administrator’s Guide
53-1002756-01
Active Directory service management
15
1. Open the Switch Administration window as described in “Opening the Switch Administration
window” on page 31.
2. Select the AAA Service tab.
3. To enable Active Directory service, select Active Directory from the Primary AAA Service menu.
4. Select None, Switch Database when Active Directory authentication failed, or Switch Database
when Active Directory timeout from the Secondary AAA Service menu.
NOTE
To disable Active Directory service, select Switch Database from the Primary AAA Service
drop-down menu and select None from the Secondary AAA Service drop-down menu.
5. Click Apply.
Modifying Active Directory service
To change the parameters of a Active Directory service that is already configured, perform the
following steps.
1. Open the Switch Administration window as described in “Opening the Switch Administration
window” on page 31.
2. Select the AAA Service tab.
3. Select a server from the ADLDAP Configuration list.
4. Click Modify.
The RADIUS/ADLDAP/TACACS+ Configuration dialog box displays.
5. Enter new values for the port, timeout, and domain.
6. Click OK to return to the AAA Service tab.
7. Cl ick Apply.
Removing Active Directory service
To remove an Active Directory server, perform the following steps.
1. Open the Switch Administration window as described in “Opening the Switch Administration
window” on page 31.
2. Select the AAA Service tab.
3. Select a server from the ADLDAP Configuration list.
4. Click Remove.
NOTE
The server is not deleted until you apply the changes from the AAA Services tab.
5. Click Apply in the AAA Services tab.
A confirmation dialog box displays, warning you that you are about to remove the selected
server.
6. Click Yes in the confirmation dialog box.